Testing turns assemblies into dependable products. We provide core quality control inspection and product-specific test development — from flying probe and functional test to burn-in and thermal cycling.
Testing turns assemblies into dependable products. Inspection and test are where workmanship becomes measurable and where early failures are caught before they reach your customer. Circuits Central provides core quality control testing as well as support for product-specific test procedures that improve confidence in reliability and function.
The biggest testing challenge most teams face isn’t choosing a test name — it’s turning functional requirements into a clear definition of “pass,” then building a repeatable process that doesn’t depend on individual knowledge. We help design, implement, and execute test strategies that scale with your product from prototype to production.
Test coverage should match risk, not just tradition. We help you select the tests that provide the most risk reduction for your specific product — not the most tests, and not the cheapest workaround. Then we implement them consistently and documentably across revisions.
AOI — Automated Optical Inspection
High-speed optical scanning detects solder defects, missing components, incorrect polarity, and placement errors across all visible surfaces.
X-Ray Inspection
Verifies hidden solder joints under BGAs, QFNs, and leadless packages. Detects bridging, voids, missing balls, and misalignment that optical inspection cannot reach.
Functional Testing
Validates the assembled board performs its intended functions under defined conditions using a purpose-built test setup. Catches integration issues that electrical testing alone misses.
JTAG / Boundary Scan
Uses IEEE 1149.1 architecture to test interconnects, load firmware, and validate digital logic without full physical probe access. Reduces fixture complexity for dense assemblies.
Flying Probe Testing
Fixtureless probing ideal for prototypes and low-volume builds. Tests continuity, shorts, and component values without requiring a dedicated test fixture design and build.
ESS, Burn-In & Thermal Cycling
Accelerated testing that exposes early-life failures and temperature-related weaknesses before product ships. Used when reliability screening is part of acceptance criteria.
| Test Method | Best For | Considerations |
|---|---|---|
| Flying Probe | Prototypes and low-volume — no fixture required, flexible for revisions | Coverage depends on test access points; slower than fixture-based methods at volume |
| ICT (In-Circuit Test) | Higher-volume production screening where fixture cost is justified | Fixture design and build lead time required; best for stable, mature designs |
| Functional Test | Validating end-to-end behavior including firmware and integration | Requires clear pass/fail definition, controlled inputs, and a known-good reference |
| JTAG / Boundary Scan | Dense digital assemblies with boundary-scan compatible devices | Requires device support and chain planning during design |
| ESS / Burn-In | Reliability screening and early-life failure identification | Must be defined carefully — unnecessary stress without clear objectives adds cost without insight |
Define the Risks
Identify the failure modes that matter most — power integrity, programming, RF performance, thermal stability, or specific functional paths. This drives the test selection, not convention.
Choose Measurable Criteria
Convert risk into measurable checks with explicit pass/fail thresholds. Ambiguous criteria create ambiguous results — clarity here saves debugging time later.
Confirm Test Access
Validate test point availability, connector access, boundary-scan chain, and fixture constraints before committing to a test method. DFT planning during design dramatically improves outcomes here.
Build and Validate
Run test procedures on early builds, compare against known-good references, and refine the procedure before committing to a production test plan.
Document and Control
Lock the test procedure to the product revision so results remain comparable across builds and revisions. Outputs include test logs, pass/fail summaries, and defect notes.
Test coverage improves significantly when planned during design. Simple decisions such as reserving test pads, selecting accessible connectors, and keeping programming headers consistent save time during bring-up and make later product-specific testing more practical. If you have constraints on enclosure access, power sequencing, or firmware loading, sharing those early helps define a test approach that fits the product, not just the PCB.
Our assembly inspection process includes solder paste inspection, post-reflow solder joint inspection, manual visual inspection, and automated optical inspection (AOI). X-ray inspection is used where required to examine hidden solder joints such as BGAs. Product-specific electrical or functional testing is available when scoped during quotation using your fixtures and procedures, or a procedure we help develop.
We inspect deposited solder paste before component placement and reflow using a method appropriate to the build. This may involve a dedicated solder paste inspection (SPI) machine, the stencil printer’s inspection system, or manual inspection. The inspection approach is selected for the project rather than assuming every build needs the same equipment.
Assembly inspection checks physical workmanship, component placement, and solder joints. Functional testing checks how a powered assembly or product operates against a defined procedure. Circuits Central provides assembly inspection and can also perform product-specific electrical and functional testing using your procedures and fixtures, or help develop a test procedure if needed.
Yes. Circuits Central can perform electrical and functional testing using customer-supplied test fixtures and procedures. Share your test requirements during quotation so we can define the test scope and identify the equipment, fixtures, and instructions needed. Functional testing is scoped per project rather than assumed on every order.
Yes. We can help develop a test procedure for your product. Share the functions you need to verify, any existing design or test documentation, and the expected pass/fail requirements. We can then work with your team to define a test approach and the fixtures or equipment needed for production testing.
Yes. During NPI we can help align test expectations early, including what should be verified at board level versus later system integration. The goal is a documented approach tied to your product revision, with clear pass/fail criteria. Discuss test requirements during quotation or build planning so coverage and schedule are realistic.
Plan electrical access during design, before boards are fabricated. Adequate test points and clear assembly documentation make later inspection and product-specific testing more practical. Share DFT or test-access preferences early so we can factor them into quotation and build planning.
Yes. We can incorporate customer-supplied labelling and packaging requirements into the agreed box build or post-assembly scope. Provide the relevant label files, placement instructions, serial-number requirements, and packaging documentation during project planning so these steps can be included in the quotation and production instructions.
We’ll reply within 1-2 business days.
We’ll reply within 1-2 business days.
We’ll reply within 1-2 business days.
We’ll reply within 1-2 business days.